潔凈區部分高效過濾器進行更換時,用干凈的抹布清潔高效空氣過濾器的靜壓箱,然后,打開高效空氣過濾器內包裝,將密封條粘貼到高效空氣過濾器的進風側,平穩的把過濾器放入靜壓箱內,搬運時一定注意輕拿輕放,并記錄過濾器規格型號、編號及安裝位置.固定過濾器時,先檢查過濾器在靜壓箱的中間,過濾器與靜壓箱四周離距相當,固定件應對角固定,防止受力不均或損壞過濾器.靜壓箱內固定螺母應旋緊,使過濾器與靜壓箱之間的連接吻合且密封.然后開啟空調機組,對系統進行通風后,打開過濾器內包裝,按以上步驟進行更換.

When replacing some high-efficiency filters in the clean area, clean the static pressure box of the high-efficiency air filter with a clean cloth. Then, open the packing inside the high-efficiency air filter, paste the sealing strip on the air inlet side of the high-efficiency air filter, and place the filter in the static pressure box smoothly. When handling, pay attention to handle it lightly, and record the specifications, types, numbers and installation positions of the filter. When the filter is in the middle of the static pressure box, the distance between the filter and the surrounding of the static pressure box is equal. Fixed parts should be fixed at an angle to prevent uneven force or damage to the filter. Fixed nuts in the static pressure box should be tightened to make the connection between the filter and the static pressure box coincide and seal. Then open the air conditioning unit, after ventilating the system, open the packaging in the filter and replace it according to the above steps.

裝好高效過濾器后,運行系統,檢查有無漏風.當發現有漏風時,做如下處理:緊固固定件或更換密封條并重新安裝,高效空氣過濾器本身漏風,則需要更換新的高效空氣過濾器.接下來,安裝高效空氣過濾器面板,安裝時,按原標記好的方向安裝,面板與頂棚的連接處盡量減少空隙,防止灰塵積聚.高效空氣過濾器安裝后,應重新進行環境檢測,并做驗證,為下次確定高效空氣過濾器報廢提供可靠的依據.http://www.shumawo.com.cn

After installing the high-efficiency air filter, the operating system checks whether there is air leakage. When air leakage is found, the following treatment should be done: fastening fixtures or replacing sealing strips and re-installing. If the high-efficiency air filter itself leaks, a new high-efficiency air filter should be replaced. Next, install the panel of the high-efficiency air filter. When installing, install the panel in the direction marked before, and minimize the emptiness at the connection between the panel and the ceiling. Clearance, prevent dust accumulation. After installation of the high-efficiency air filter, the environment should be re-examined and verified to provide a reliable basis for the next determination of the abandonment of the high-efficiency air filter.